Blue Screen of Death Windows 7 201

QUICK FIX BLUE SCREEN OF DEATH WINDOWS 7 AND ALL YOU NEED TO KNOW

Blue Screen of Death Windows 7- Have you been a victim of the Blue Screen of death Windows 7? If your answer is yes, then you need to read through this article from beginning to end. What is referred to as the Blue Screen of death Windows 7 is an error screen displayed on a windows computer after a fatal system error, known as a system crash. This could be attributed to the condition of the operating system not able to operate safely. Therefore, this article will provide you with all the details needed to fix Blue Screen of Death on Windows 7 quickly.

QUICK FIX BLUE SCREEN OF DEATH WINDOWS 7 AND ALL YOU NEED TO KNOW

The Blue Screen of death Windows 7 experienced by many users is believed to be caused by incompatible drivers with the Windows 7 operating system, malfunction hardware (i.e., faulty memory, power supply issues, overheating of hardware components, or operation of hardware components beyond its limit), hard disk corruption among other issues. The blue screen of death often displays with error codes on the screen depicting that there are issues that need to be attended to on the computer. Below are some possible solutions to fix the Blue Screen of death Windows 7.

Quick Fix for Black Screen of Death Windows 7

There are several possible solutions or quick fixes that can come in handy to fix the Blue Screen of death Windows 7, follow each guided step by step to the end to achieve an optimum result.

Common / General Quick Fix Blue Screen of death Windows 7

Safe Mode

The above step is to be carried out when you see a blue screen error and windows seven restart immediately, and the error text is unreadable, you should adhere to the guideline below to disable the automatic restart option.

Step 1: right-click on your computer

Step 2: navigate to properties

Step 3: scroll to the advance tab

Step 4: click the settings button at the Startup and Recovery section

Step 5: “Uncheck the automatically restart option” at the System failure section.

Step 6: Lastly click OK

This procedure can be performed in “Safe Mode” if you are unable to boot into Windows and follow the guideline below and restart your computer afterward. To boot Windows 7 into safe mode, do this:

Step 1: Reboot your PC

Step 2: click F8 on your keyboard before the Windows logo appear

Step 3: navigate using the arrows key to select “Safe Mode” from the reboot menu.

Step 4: Press enter

Install updates to Fix Blue Screen of death Windows 7

Blue Screen of Death Windows 7
Blue Screen of Death Windows 7

By installing recent updates from Microsoft, can it automatically correct any bug you currently face with window 7? If you are yet to set your PC window’s update, here are the step by step guide to do that:

  1. Click the Start button
  2. Type “update” in the search box
  3. Select Windows Update from the list
  4. Choose Check for updates, on the left
  5. Review any pending updates
  6. Finally, click Install updates
  • Check for hard disk errors

Check if Windows 7 has several utility tools that can help identify and fix specific errors. With these utility tools, you can check for any hard disk or memory issues.

  • Check for hard disk issues:
  1. Click the Start button
  2. Navigate to Computer
  3. Right-click on the main drive and click properties where Windows 7 is installed on.
  4. Select the ‘tools tab,” and you will find the Error-checking menu, on that page, click on Check now.
  5. Then choose the option of Automatically fix file system errors. Also, you can to select Scan for an opportunity, then follow by the Attempt Recovery
  6. Click Start to begin the process
  • Check for memory issues:
  1. Click the Start button
  2. Click Control Panel
  3. In the search box type, “Memory.”
  4. varieties of options will be displayed to you, click on Diagnose your computer’s memory problems
  5. Then ensure you follow the next procedures to correct the bug
  • Startup Repair

You can manually run the Startup Repair tool if there is a recovery option preinstalled on your computer, or have the original installation disk, or have the system recovery and repair disk.

If you have the “Startup Repair” already installed on your system:

  1. Take out any CDs, DVDs or USBs from the system
  2. Reboot your computer
  3. Before the Windows 7 logo appears, press and hold F8
  4. Using the arrow keys, select Repair your computer at the Advanced Boot Options screen, and press Enter.
  5. Select a keyboard layout and click Next
  6. Click Startup Repair at the System Recovery Options window
  • Fixing Base on the type of Error

0x0000007B (INACCESSIBLE BOOT DEVICE): this Error can be caused by data corruption on the hard drive. To fix this Error, follow any of the guidelines below.

Hard disk cables

Check and make sure all your hard disks cables are correctly connected.

Run chkdsk tool ships

You can as well run chkdsk which can be used to check and as well repair your drives for file system corruption.

  1. Insert your Windows installation DVD
  2. Power up your PC
  3. If You see the option that asked you to “Press any key to boot from CD or DVD…,” then follow the instruction by toggling on any key
  4. Select Repair your computer
  5. Select your operating system and click Next
  6. Choose Command Prompt: chkdsk /f /r
  7. Hit Enter
  • Rebuild the BCD

Boot Configuration Data (BCD), contains boot configurations options of Windows. After that is required of you to deploy is the Bootrec.exe tool to repair boot configuration data, and you can access the Bootrec.exe utility with a Windows 7 installation disk:

  1. Insert a bootable or installation disk and boot.
  2. Press any key to boot the system from the disk
  3. Select Repair your computer
  4. Select your current PC operating system then click on the Next option
  5. Select Command Prompt
  6. Enter this command: bootrec /rebuildbcd
  7. Press enter

0x00000024 (NTFS FILE SYSTEM): this error code can be caused when the hard disk information is corrupted with a virus.

Ensure you try to correct the issue by running the chkdsk utility tool. If chkdsk fails, try to take out any hardware or new software driver, you may have recently added to your system. On the other hand, your hard drive might be damaged, so you should consider replacing it in case none of the solutions here works for you.

Blue Screen of Death Windows 7

Method #1: Run chkdsk

  1. Insert the bootable disk and boot your PC
  2. Tap on any key
  3. Select Repair your computer
  4. Select your operating system and click Next
  5. Select Command Prompt
  6. After the CMD is open, then probe the system by entering this command: chkdsk /f /r
  7. Press enter

0x0000007E (SYSTEM THREAD EXCEPTION NOT HANDLED)

To fix this error code on the Blue Screen of Death Windows 7, do any of the following:

  • Ensure there is enough space on your hard disk drive
  • Make sure your PC (desktop or laptop) has the latest BIOS version, and it’s compatible.
  • Your PC video drivers are compatible with Windows 7
  • Your PC drivers are correctly configured and consistent with your system

You can visit your computer’s manufacturer website for more information on how to update BIOS and the drivers you need to install for Windows 7.

0x0000008E (KERNEL MODE EXCEPTION NOT HANDLED)

Once this Error pops up, you can try the following to fix it:

  • Ensure your PC BIOS is up to date. Navigate to your computer’s manufacturer website for more details on steps to update your system BIOS.
  • Uninstall any recently added drivers or make sure you have the latest version that is compatible with Windows 7

0x00000050 (PAGE FAULT IN NONPAGED AREA): incompatible drivers can cause this Error with Windows 7 or due to hard disk corruption.

Follow the guide below to fix this.

  • Restart the Windows 7 into the Last Known Good Configuration mode
  • Uninstall any new installed driver or software (Ensure you’re using the latest available versions for these drivers and they are compatible with Windows 7)
  • Check the hard disk cables to be sure they are correctly connected.

If you want to boot Windows 7 into the “Last Known Good Configuration mode,” do the following:

  1. Reboot your computer
  2. Click F8 continuously before the Windows logo appears
  3. From the “Advanced Tab” in the boot options menu, choose “Last Known Good Configuration.”
  4. Press Enter

0x000000D1 this stands for (DRIVER IRQL NOT LESS THAN OR EQUAL TO): can be caused by an incompatible driver you may have recently installed.

ensure you help the Windows 7 boot into Safe Mode and then uninstall the problematic driver.

0x000000EA (THREAD STUCK IN DEVICE DRIVER): this particular Error can be caused due to an issue with the video driver and Windows 7.

To fix this Error,

  • Ensure you have the latest driver for the video adapter is available and it’s compatible with Windows 7.
  • Visit your computer’s manufacturer website for more information and resources on the drivers available.

Related Posts:

QUICK FIX TO BLACK SCREEN OF DEATH iPhone 2019 [UPDATED GUIDE]

QUICK FIX TO WINDOWS 10 BLACK SCREEN OF DEATH [SOLVED!]

[SOLVED!] XBOX ONE BLACK SCREEN OF DEATH [STEP BY STEP GUIDE]- QUICK FIX TO

ANDROID PHONE SYMBOLS AT TOP OF SCREEN – MEANING AND ALL YOU NEED TO KNOW

HOW TO FACTORY RESET iPhone 7 (PLUS) / 6S (PLUS) / 6 (PLUS) / 5S / 5C / 4[MASTER UNLOCK 2020]

Conclusion on Quick Fix Blue Screen of Death Windows 7 and all You Need to Know

There you have some of the Quick Fixes Blue Screen of Death Windows 7. If and when you encounter such a problem, read through this article and select the one appropriate to you.

Tag: Quick Fix Blue Screen of Death Windows 7 and all You Need to Know